◆ 测量参数 Measure parameters:◇ 输入：电压、电流、功率、功率因数、电网频率、相位角、总谐波及0~39次各谐波分量    Input: Vrms, lrms, W, PF, Hz, phase angle, total harmonic and 0~39th harmonic components ◇ 输出：灯电压、灯电流、灯丝电流、导入阴极电流、灯功率、波峰系数、振荡频率    Output: Lamp voltage, lamp current, filament current, guided cathodic current, lamp power, crest factor and oscillatory frequency◇ 启动：启动过程灯电压、灯电流、灯丝电流、导入阴极电流变化曲线及参数，预热时间    Startup: Startup lamp voltage, lamp current, filament current, guided cathodic current curve and parameter, preheating time◇ 预热能量测试：预热能量及灯丝预热启动时间，电子镇流器启动后0~5秒内灯丝电压、灯丝电流、灯丝功率的变化曲线    Pre-heat energy test: test pre-heat energy and filament pre-heat time, test parameter changing curves of filament voltage,     filament current, and filament  power from 0 to 5 seconds after startup        ◆ 输入精度 Input accuracy: ±(0.1% re*g+0.1% range+1 digit)◆ 输出精度 Output accuracy: ±(1% re*g+1% range+2 digit)  ◆ 八窗口同时显示输入，输出各电参数，便于比较分析     8 windows for displaying input and output parameters simultaneously, convenient for comparison and analysis◆ 便携式，仪器本身可以完成打印，可方便地通过RS-232C接口与电脑连接，同时提供中、英文测试报告，便于国际交流     Portable style; directly send data to printer for printing (no need computer), convenient to communicate with computer      through RS-232C interface. Reports both in Chinese and English   ◆ 满足国际及国内标准IEC60929、IEC60969、IEC61000-3-2、GB/T15144-2005、GB/T17263-1998荧光灯用交流电子镇流器性能要求      Meets test requirements for electronic ballasts in international standards IEC60929, IEC60969, IEC61000-3-2  标签：     中山市电子镇流器   中山市电子镇流器厂家

广东 中山市中山市电子镇流器厂家
UI2000电子镇流器综合性能测试仪